| 00:32 | paulk | joined the channel |
| 00:32 | paulk-bis | left the channel |
| 03:22 | jn | left the channel |
| 03:22 | jn | joined the channel |
| 03:22 | jn | left the channel |
| 03:22 | jn | joined the channel |
| 09:07 | dos | left the channel |
| 09:20 | dos | joined the channel |
| 10:45 | max_bxl | joined the channel |
| 10:45 | max_bxl | hello everyone !
|
| 10:45 | max_bxl | axiom club brussels here !
|
| 11:17 | max_bxl | I added a small paragraph in the wiki, don't hesitate to correct it ! https://wiki.apertus.org/index.php?title=AXIOM_Beta/Manual#External_HDMI_Recording%2FMonitoring
|
| 11:59 | max_bxl | left the channel |
| 14:55 | aombk2 | left the channel |
| 20:04 | se6astian_ | Bertl: is this issue: https://pastebin.com/qB8qt1CS
|
| 20:04 | se6astian_ | actually this issue: https://github.com/apertus-open-source-cinema/axiom-firmware/issues/179 ?
|
| 20:34 | Bertl | hmm ...
|
| 20:43 | Bertl | I think this could be a problem with the python smbus library
|
| 20:45 | Bertl | 22b6 and 22b7 are correctly labeled and should select RFE/W but the i2c access seems to fail
|
| 20:46 | Bertl | I would use rf_sel.py A/B and check with i2cdetect whether the PIC responds properly
|
| 20:57 | anuejn | hey, I started taking some notes / doing a breakout board for the canon 5D mark II image sensor
|
| 20:57 | anuejn | https://github.com/anuejn/2d5
|
| 20:58 | anuejn | not sure if it will lead anywhere but I had the idea laying around for so long, that I finally felt urged to tackle it
|
| 20:58 | anuejn | s/idea/idea of reverse engineering it/
|
| 21:01 | Bertl | cool
|
| 21:07 | se6astian_ | +1
|
| 21:30 | se6astian_ | https://mastodon.social/@apertus/111257674276919742
|
| 21:32 | dos | left the channel |
| 21:33 | dos | joined the channel |
| 22:03 | anuejn | uuuh nice
|
| 22:08 | anuejn | is it the filter I whished for?
|
| 22:27 | BAndiT1983 | cool
|
| 23:29 | Spirit532 | left the channel |
| 23:30 | Spirit532 | joined the channel |