| 03:53 | tonsofpcs | left the channel |
| 03:53 | tonsofpcs | joined the channel |
| 05:10 | jucar1 | joined the channel |
| 05:12 | jucar | left the channel |
| 07:33 | s3bastian | joined the channel |
| 08:43 | jucar | joined the channel |
| 08:44 | jucar1 | left the channel |
| 10:04 | philippejadin | joined the channel |
| 10:23 | philippejadin | left the channel |
| 11:50 | Bertl | morning folks!
|
| 12:09 | s3bastian | hello!
|
| 12:09 | s3bastian | long night again? ;)
|
| 12:12 | Bertl | as usual!
|
| 12:27 | s3bastian | and how far did you get with the zedboard?
|
| 12:45 | Bertl | well, I got the development environment up and running and I managed to re-build the demo project
|
| 12:46 | Bertl | I'm now trying to reduce the build process to the minimum required steps to build something useable
|
| 12:53 | s3bastian | nice
|
| 12:54 | s3bastian | I forwarded you Gabes email, could you be so kin d to reply to him what you did to avoid/solve the problem he had?
|
| 13:00 | Bertl | sure
|
| 13:03 | Bertl | ah, I see, well, I'm not yet connecting via jtag to the board
|
| 13:04 | Bertl | but I will check this out soon as well, so I'll try to answer that when I get there
|
| 13:45 | s3bastian | great
|
| 14:17 | philippejadin | joined the channel |
| 14:33 | philippejadin | left the channel |
| 15:17 | Bertl | okay, jtag via digilent via ftdi is working :)
|
| 15:18 | Bertl | I have to run in a few minutes, but I describe the process here, will write something up for the wiki later
|
| 15:18 | Bertl | I downloaded the following packages:
|
| 15:18 | Bertl | digilent.adept.runtime_2.13.1-x86_64.tar.gz
|
| 15:18 | Bertl | digilent.adept.utilities_2.1.1-x86_64.tar.gz
|
| 15:19 | Bertl | libCseDigilent_2.4.3-x86_64.tar.gz
|
| 15:19 | Bertl | (for x86 you want the 32bit versions)
|
| 15:20 | Bertl | then I installed the runtime (tar xzf digilent.adept.runtime_2.13.1-x86_64.tar.gz; cd digilent.adept.runtime_2.13.1-x86_64; ./install.sh)
|
| 15:20 | Bertl | and here is the important part: _and_ the ftdi driver
|
| 15:21 | Bertl | (cd ftdi.drivers_1.0.4-x86_64; ./install.sh)
|
| 15:21 | Bertl | then the utilities (same as runtime)
|
| 15:22 | Bertl | at this point, 'djtgcfg enum' should show the board
|
| 15:23 | Bertl | note that you need to fix the udev rules, restart udev and unplug/replug the usb-jtag to get the driver (ftdi_sio) unloaded and the permissions for the usb device changed
|
| 15:24 | Bertl | the libCseDigilent_2.4.3-x86_64.tar.gz contains two files in ISE14x/plugin which need to be copied to the ISE plugin directory
|
| 15:24 | Bertl | after that, the following should work:
|
| 15:24 | Bertl | xmd
|
| 15:24 | Bertl | connect mb mdm -cable type xilinx_plugin modulename digilent_plugin
|
| 15:26 | Bertl | http://pastebin.com/SNrfBqb9
|
| 15:26 | Bertl | of course, the default image has no mdm IP
|
| 15:34 | s3bastian | great!
|
| 16:45 | s3bastian | left the channel |
| 17:36 | tonsofpcs | left the channel |
| 17:36 | tonsofpcs | joined the channel |