| 23:00 | abc | left the channel |
| 00:55 | Bertl_oO | off to bed now ... have a good one everyone!
|
| 00:55 | Bertl_oO | changed nick to: Bertl_zZ
|
| 01:31 | RexOrCine1 | left the channel |
| 02:20 | rajdeep | joined the channel |
| 02:26 | HEGAZY | joined the channel |
| 02:39 | rajdeep | left the channel |
| 02:59 | HEGAZY | left the channel |
| 04:22 | rajdeep | joined the channel |
| 04:24 | rajdeep | when I convert the apertus_logo.png to aperus_logo.h, most of the value are 0x00, is this normal?
|
| 04:52 | lexano | left the channel |
| 04:56 | lexano | joined the channel |
| 05:09 | rajdeep | left the channel |
| 08:36 | namibj | left the channel |
| 08:43 | namibj | joined the channel |
| 09:01 | alexML_ | joined the channel |
| 09:04 | alexML | left the channel |
| 11:45 | Bertl_zZ | changed nick to: Bertl
|
| 11:45 | Bertl | morning folks!
|
| 12:00 | se6ast1an | good day
|
| 12:15 | RexOrCine | joined the channel |
| 12:22 | RexOrCine1 | joined the channel |
| 12:25 | RexOrCine | left the channel |
| 13:47 | BAndiT1983|away | changed nick to: BAndiT1983
|
| 14:34 | rajdeep | joined the channel |
| 14:37 | rajdeep | left the channel |
| 15:14 | BAndiT1983 | changed nick to: BAndiT1983|away
|
| 16:18 | Bertl | off for now ... bbl
|
| 16:18 | Bertl | changed nick to: Bertl_oO
|
| 16:53 | BAndiT1983|away | changed nick to: BAndiT1983
|
| 18:07 | metal_dent[m] | BAndiT1983: Hi, does the visualizer work for both firmware and bootloader?
|
| 18:08 | BAndiT1983 | hi metal_dent[m], only for firmware and usually only for visual part and controls
|
| 18:08 | BAndiT1983 | bootloader is another topic, which is more difficult
|
| 18:11 | metal_dent[m] | So what exactly is to be done in the remote bootloader project for gsoc? I checked out the page and the goals but it'd be great if you can tell a bit
|
| 19:07 | BAndiT1983 | bootloader will be like some sort of BIOS and handle the periphery, like LCD or also pic16s, latter one will be flashed through the main pic32 and the functionality in the bootloader
|
| 19:08 | BAndiT1983 | also the pic32 will flash itself by using the feature in the bootloader, as BL also has to be updated we probably need 2 of them and switch to the latest one or to one which is still working, if flashing fails
|
| 19:09 | BAndiT1983 | communication between firmware and bootloader will happen through a circular buffer, which contains commands, like update screen or data received through USB-UART
|
| 19:53 | BAndiT1983 | regarding bootlaoder, some tests were already done and reading from the pic16s was also working, it was accomplished by issuing low-voltage programming signals from pic32, like a pic programmer does it
|
| 20:14 | davidak | joined the channel |
| 21:11 | BAndiT1983 | changed nick to: BAndiT1983|away
|