#apertus IRC Channel Logs

off to bed now ... have a good one everyone!

I tried to segregate the scripts into which adapters they might use here -> https://pastebin.com/B7ChNCx3

off for now

s/goals/goal

so for example things like gamma_conf

The adapters are already in place , we now need to make use of them to move scripts to daemon

mat4_conf can also use the memoryAdapter

Also ,This is the list of camera control parameters that I have, But BAndiT1983|away told me this is outdated

So if we have any discrete parameters that need to be added ,please update them here

morning folks!

Y_G, hasn't said "outdated" about parameters, but merely that some of them are not available yet, as gateware or firmware is not prepared

Hey florent , The gpio pins of ft601 can be used to set the mode and number of channels, but how do we set the in , out or inout mode of a channel?

the settings can be changed via USB and they can also be configured in the eeprom

https://www.ftdichip.com/Support/Documents/AppNotes/AN_379%20D3xx%20Programmers%20Guide.pdf

I don't think you can set it on a per channel basis

So how to choose 1 OUT pipe? As I am using only one channel( it is more efficient)

Ok Thanks :)

might be a bit oftopic, but i wonder if there's some name for lighting a scene from the two sides, where the light from one side is blue-green-ish and from the other side red-orange-ish. i've seen the effect being used quite a few times and it worked quite well, so i also wonder why this works quite well

Should also be noted that creating a contrast of two approximately opposite colours lends greater scope for effecting hue and so considerably changing a shot's feel in post.