#apertus IRC Channel Logs

hey tbehaghel!

did you manage to test the cmv_reg 127 ?

you told me

what was the error message/result?

i can try to do it again now

[root@beta ~]# ./power_init.sh

wait a few seconds, then

[root@beta ~]# cat cmv_hdmi3.bit >/dev/xdevcfg

and please upload the text output to a pastebin, e.g. pastebin.com

command not found

sorry, that was my error typing

cmv_reg 127 returns 0x00000000

ZED_5V 5.1562 V [2100] +12.5000 mV [140] +625.00 mA BETA_5V 5.1172 V [20c0] +23.7500 mV [260] +1187.50 mA HDN 3.2617 V [14e0] +0.0000 mV [000] +0.00 mA PCIE_N_V 3.2617 V [14e0] -0.0391 mV [fff] -1.95 mA HDS 3.2422 V [14c0] +0.0000 mV [000] +0.00 mA PCIE_S_V 3.2617 V [14e0] +0.0000 mV [000] +0.00 mA RFW_V

yeah, i tried ;) ... and failed

you have a web browser on your PC?

just go to pastebin.com and paste it there

that what i did

what you did is copy/paste the output here directly

document

https://pastebin.com/

yes i copy paste de code, get a new paste

paste the URL here

https://pastebin.com/GvrpeheX

by the way, blue led from pmod is on

lol

;)

okay, that looks fine so far

then power up the device again and do:

[root@beta ~]# i2cdetect -y -a -r 2

[root@beta ~]# i2cdetect -y -a -r 2

ok

https://pastebin.com/ZqtexnnB

look in your filesystem/image for an icsp.bit

check /opt/BITS/

test

i couldn't send anymore messages..

i checked /opt/BITS

no icps.sh

the file is supposed to be in this folde?

you can get it from here

icsp.bit not icps.bit :)

wget http://vserver.13thfloor.at/Stuff/AXIOM/BETA/ICSP/icsp.bit

ok, i grabbed it

i first copy the file on the root folder?

if not, then yes, copy it there please

hey, got any results from the commands now?

ok,

no

i had the blue led on for one moment

but still when i run the kick manual, it still loop without stopping

and you removed the sensor as instructed, did you?

yes, then run the ./prep_icsp.sh and report the output/errors

https://pastebin.com/VZE7APvc

on

when run all the previous commands

you should get a notification automatically

we still trying to debug the camera for the moment with herbert

please correct the spelling mistakes

and simply copy/paste the commands I provide

-y not _y for the i2cdetect

;)

i connected the camera to the IRC pc

(the version/revision is printed on the PCB)

remove power completely from the beta for 15 seconds

./prep_icsp.sh

sensor on ?

we leave the sensor off for now :)

you are having problems with the sensor interface (for whatever reason)

the i2cdetect should show the i2c mux on the power board

./gpio.py init

where does your SD card image come from BTW?

only the sd card that was in the package

you might have gotten an image which doesn't handle the 'newer' power boards, let me check

please run and pastebin the result from:

https://pastebin.com/HxuuCmUE

okay, try:

i2c0_bit_set 0x22 0x15 6

./gpio.py

https://pastebin.com/BLfMePZL

i2cdetect -a -y -r 2

https://pastebin.com/k88yzegM

sorry, will have to wait till evening ...

but I'm quite confident, that it is a software problem

what time for tonoght?

I should be back around 21:00 (maybe a little later)

I'm at work

21h, i won't be here

okay, we are flying to california tomorrow in the morning

but we might be able to address this over the weekend if you're available

or on the network

ok

probably on Tuesday, because we return Monday evening

okay, off for now ... bbl

have a nice weekend!

yep, 35c3. /me also wanted to ask if you want to go there

i could give you presale vouchers