| 03:39 | jn | left the channel |
| 03:40 | jn | joined the channel |
| 03:40 | jn | left the channel |
| 03:40 | jn | joined the channel |
| 07:34 | pinkforest | left the channel |
| 07:35 | pinkforest | joined the channel |
| 16:57 | vup | Bertl: anuejn: some preliminary simulation result for the levelshifter https://f.coroot.de/20240611_18h55m03s_grim.png (I am not 100% yet that this is correct, so take with a grain of salt)
|
| 16:57 | vup | iirc 70pF is the maximum capacitive load that we have to support for mipi lp, and 15%-85% rise time has to be at most 25ns, so it seems like this levelshifter should work
|
| 17:01 | anuejn | nice
|
| 17:01 | anuejn | that sounds good
|
| 17:12 | vup | (and the simulation is the min corner of the device)
|
| 17:17 | vup | (code for the ibis -> spice conversion here: https://github.com/rroohhh/kibis2spice) basically just the kicad internal code extracted to be standalone
|
| 18:22 | anuejn | nice
|
| 18:22 | anuejn | very handy
|
| 18:26 | Bertl | nice, and we expect that <=70pf is what we get with the flat cable and the typical MIPI receiver?
|