| 01:21 | fsteinel | left the channel |
| 01:21 | fsteinel_ | joined the channel |
| 01:38 | g3gg0____ | changed nick to: g3gg0
|
| 01:43 | Jin^eLD | changed nick to: Jin|away
|
| 01:43 | fsteinel_ | changed nick to: fsteinel
|
| 02:05 | alesage | left the channel |
| 02:19 | alesage | joined the channel |
| 03:09 | slikdigit | left the channel |
| 03:44 | aombk2 | changed nick to: aombk
|
| 04:03 | comradekingu | left the channel |
| 05:26 | troy_s | https://www.smallhd.com/lp/sidefinder/
|
| 05:26 | troy_s | se6astian|away Bertl ^^ Might be worth a peek.
|
| 05:57 | Bertl | nice
|
| 06:06 | Bertl | off to bed now ... have a good one everyone!
|
| 06:06 | Bertl | changed nick to: Bertl_zZ
|
| 07:01 | davidak | joined the channel |
| 07:43 | davidak | left the channel |
| 08:16 | Andrej741 | left the channel |
| 08:16 | se6astian|away | changed nick to: se6astian
|
| 08:19 | tezburma | joined the channel |
| 08:20 | se6astian | good morning
|
| 08:23 | Francky | joined the channel |
| 08:24 | Francky | hi
|
| 09:02 | Jin|away | changed nick to: Jin^eLD
|
| 09:45 | intracube_afk | left the channel |
| 10:24 | intracube | joined the channel |
| 10:56 | tezburma | left the channel |
| 10:57 | tezburma | joined the channel |
| 12:06 | Bertl_zZ | changed nick to: Bertl
|
| 12:06 | Bertl | morning folks!
|
| 12:08 | Francky | hi Bertl
|
| 13:39 | aombk | left the channel |
| 13:44 | aombk | joined the channel |
| 14:03 | Francky | Bertl> can you confirm that only VCCO_34 and VCCO_35 are needed to use lvds outputs on the breakout board please ?
|
| 14:03 | Francky | and VCCO_HDR is not nedded
|
| 14:07 | Bertl | VIN_HDR is used to power the MicroZed (you can do that via the USB as well)
|
| 14:07 | Bertl | VCCO_34/35 and 13 are powering the I/O banks
|
| 14:08 | Bertl | as bank 13 is only connected to the pmod pads, you don't need it for the center connectors
|
| 14:18 | Francky | THANKS
|
| 14:29 | Francky | there is something on my lvds lines ! i connect the blue led on the "data_match" signal and it blinks ! so there is something on the lvds lines, but not every time the right things :)
|
| 14:44 | Francky | i've got some hardware problems that i need to fix
|
| 14:44 | Francky | it seems to work on severals sata connectors
|
| 15:33 | intracube | changed nick to: intracube_afk
|
| 15:55 | tezburma | left the channel |
| 16:04 | Francky | bye
|
| 16:04 | Francky | left the channel |
| 16:30 | francois | joined the channel |
| 16:30 | francois | changed nick to: Guest35918
|
| 16:31 | Guest35918 | nickserv register [Francois]
|
| 16:31 | Guest35918 | left the channel |
| 16:39 | rhavan | joined the channel |
| 16:52 | ItsMeLenny | joined the channel |
| 17:53 | ItsMeLenny | left the channel |
| 18:27 | slikdigit | joined the channel |
| 18:27 | slikdigit | left the channel |
| 18:27 | slikdigit | joined the channel |
| 18:35 | davidak | joined the channel |
| 21:23 | davidak | left the channel |
| 21:49 | dmjnova | Can anyone see an issue with putting a 45 degree beamsplitter between the lens and sensor?
|
| 21:50 | Bertl | less light on the sensor (about half)?
|
| 21:52 | dmjnova | well, I'm thinking about a dichroic beamsplitter
|
| 21:53 | dmjnova | one that diverts the infrared spectrum and passes the visible spectrum (or vice versa)
|
| 21:53 | Bertl | ah, well, that should work
|
| 21:57 | dmjnova | pretty much two ways I can see an RGBIr camera working: dichroic beamsplitter and two sensors or a custom color filter array where one of the two green sensels in the bayer pattern detected IR.
|
| 21:58 | dmjnova | The latter would need the color filter to be the IR filter as well for the R, G, and B sensels
|
| 21:59 | Bertl | yes, those are definitely two options
|
| 22:42 | intracube_afk | changed nick to: intracube
|
| 23:30 | se6astian | time for bed
|
| 23:31 | se6astian | changed nick to: se6astian|away
|
| 23:45 | intracube | left the channel |
| 00:54 | intracube | joined the channel |